Electric patio heaters: your patio shouldn't close at sunset.
Electric patio heaters from Bromic, Eurofase and Napoleon — hardwired and installed by our own licensed electricians (Specialty Electric, CSLB #1113915), plus plug-in heaters that need no wiring at all.

In San Diego, the patio is the best room in the house — right up until the sun goes down. Then everyone moves inside, and the space you built for dinner outside sits empty.
An electric infrared heater warms the people and the table, not the sky. No flame and no propane tank to refill. Flip a switch and the patio stays open.
Call (858) 292-9244 · Text or WhatsApp (858) 229-4772 · Visit our San Diego showroom →
The part nobody tells you
Wall- and ceiling-mounted patio heaters run on 120, 208 or 240 volts, and most need their own circuit. The larger models draw up to about 29 amps. The manufacturer's own instructions say the heater must be permanently installed and hardwired by a licensed person — it is not something you plug into the patio outlet.
If there's no 240-volt circuit where the heater goes, we run one, sized to the heater. We check that your panel has room for it before we start, and if it doesn't, we tell you what that means before we do any work.
That's not a weekend project. That's an electrician.

Sizing it right
A heater that's too small for the space just makes the patio feel almost warm. As an example, Eurofase's EF electric line runs from 1,500 watts, heating about 5 x 6 feet (30 square feet), to 6,000 watts, heating about 11 x 11 feet (121 square feet). We match the heater, and the number of heaters, to where people actually sit.
Eurofase mounted electric heaters, by size
Wall, ceiling or pole mount, in Black, Stainless Steel or White, with optional décor plates. Coverage and amps are from Eurofase's spec sheets.
- EF15, 1,500 W — about 5 x 6 ft, 120V
- EF20, 2,000 W — about 6 x 6 ft, 208V or 240V
- EF25, 2,500 W — about 7 x 7 ft, 208V or 240V
- EF30, 3,000 W — about 8 x 8 ft, 208V or 240V
- EF40, 4,000 W — about 8 x 10 ft, 208V or 240V
- EF50, 5,000 W — about 9 x 10 ft, 208V or 240V
- EF60, 6,000 W — about 11 x 11 ft, 208V or 240V
No wiring? Meet Vellura: heat and light that plugs in

Not every patio needs a new circuit. Eurofase's Vellura family plugs into a standard 120-volt outlet and is a heater and a lamp in one: 1,500 watts of infrared heat for about 25 square feet around it, under a soft 3000K LED glow.
- Floor — 80.7" tall, for the corner of a lounge or between two chairs
- Table — 32.5" tall, for an outdoor table or a side table
- Pendant — hangs from a covered deck or inside a pergola
Low, medium and high heat with a remote control. IPX4 rated for outdoor use, with overheat protection and, on the floor and table models, a tip-over shutoff. Three-year manufacturer warranty.
Shop Vellura: Floor · Table · Pendant
Mounted or plug-in?
| Mounted (Bromic, Eurofase, Napoleon) | Vellura plug-in (Eurofase) | |
|---|---|---|
| Power | 120, 208 or 240 V, hardwired | 120 V, plugs into a standard outlet |
| Installation | Licensed electrician; new circuit if needed | Very little extra wiring, if any |
| Coverage | Eurofase EF: about 30 to 121 sq ft (1,500 to 6,000 W) | About 25 sq ft (1,500 W) |
| Best for | Dining areas and larger patios | A lounge corner, an outdoor table, a pergola |
| Price | Quoted after we see the patio | $500 to $1,200 |
What it costs
- Every patio is quoted after we see it — the heater size, the distance from your panel and the mounting height all change the job. Estimates for electrical work are free.
- Lifetime labor warranty on everything we install.
Black Friday: installed before the holidays. Buy it from Fan Diego, have our licensed electricians install it before the holidays, and take an extra 5% off the product. Installation labor isn't discounted. Excludes Big Ass Fans.
Want help choosing? Book a design consultation: an ALA-certified lighting specialist comes to you for $195, and $145 goes toward your installation when you book within 60 days.
How it works
- Come into our San Diego showroom, or send us a photo of your patio.
- We size the heater to the space and where people sit.
- We run the circuit, mount the heater, and hand you the switch.
Visit the San Diego showroom
8020 Clairemont Mesa Blvd, San Diego, CA 92111
(858) 292-9244
Winter hours (through April)
Monday to Friday: 9:30 am to 5:30 pm
Saturday: 10 am to 5 pm
Sunday: Closed
Showroom details and directions →
Also installed by our electricians: LED mirrors · picture and art lighting
Hi, I'm John with Specialty Electric. I'm a licensed electrician and second-generation owner of Fan Diego — and a Lighting Specialist certified by the American Lighting Association, like every member of our showroom team. We've been lighting and cooling San Diego homes since 1983 — and keeping them warm outside, too.
Because comfort IS luxury.
Patio heater questions
Do electric patio heaters need to be hardwired?
Wall- and ceiling-mounted 240-volt heaters do. Bromic's instructions, for example, say the heater must be permanently installed and hardwired by a licensed person. That usually means running a 240-volt circuit to where the heater mounts. Plug-in heaters like Eurofase's Vellura run on a standard 120-volt outlet instead.
Is there a patio heater that plugs into a regular outlet?
Yes. Eurofase's Vellura floor, table and pendant heaters plug into a standard 120-volt outlet. Each is 1,500 watts, warms about 25 square feet, and has a built-in 3000K LED light, so it doubles as a patio lamp.
How much area does one electric patio heater cover?
It depends on the wattage. Eurofase's EF electric heaters cover about 30 square feet at 1,500 watts up to about 121 square feet at 6,000 watts. A 1,500-watt Vellura plug-in heater covers about 25 square feet. Larger patios usually take more than one heater.
Why electric instead of propane?
No flame, no tank to refill or store, and nothing to light. An electric infrared heater turns on with a switch and warms the people in front of it.
How much does it cost to install a patio heater in San Diego?
Every patio is quoted after we see it, because the heater size, the distance from your panel and the mounting height all change the job. Estimates for electrical work are free; the optional design consultation is $195, with $145 credited toward installation within 60 days. Lifetime labor warranty on everything we install.
